EXP L4-98 1.6L SOHC VIN 4 2-bbl HP (1985)
Ignition Control Module: Description and Operation
Thick Film Ignition Module
This Ignition Module is mounted on the outside of the distributor housing with two screws.
Ignition System Wiring Diagram
It is electrically connected to the pick-up coil assembly without using a wiring harness between the module and the pick-up coil. Once receiving a signal
from the pick-up coil assembly it turns the ignition coil primary circuit On and Off causing high voltage in the secondary to fire the spark plugs.