ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Keyless Entry Module > < Driver Seat Module|Page 8891
Page 2
background image

5. Disconnect the (A) GEM electrical connectors from the (B) GEM.

6. Remove the screws and the GEM.

INSTALLATION

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

1. To install, reverse the removal procedure.

^

Check for proper operation.

Keyless Entry Module > < Driver Seat Module|Page 8891