Expedition 2WD V8-281 4.6L SOHC (1998)
Keyless Entry Transmitter: Description and Operation
NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.
The keyless entry remote transmitter initiates the following electronic door lock and memory (Navigator only) system functions:
^
Unlocks the driver door.
^
Unlocks the driver door and moves the memory seat and mirrors into their corresponding memory positions. (Only available with the remote
memory feature).
^
Unlocks all doors.
^
Locks all doors.
^
Enables the panic alarm.
^
Turns on the interior lamps when unlocking and off when locking.
^
Chirps the horn once when the LOCK button on the keyless entry remote transmitter is pressed twice and all doors are closed.
^
Chirps the horn twice when the LOCK button on the keyless entry remote transmitter is pressed twice and a door is left open.
^
Allows up to four keyless entry remote transmitters to be programmed.
NOTE: If more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the
driver door a second time.
To unlock the driver door press the UNLOCK button on the keyless entry remote transmitter.
To unlock all doors press the UNLOCK button on the keyless entry remote transmitter a second time, within five seconds of the first unlock.
To lock all doors press the LOCK button on the keyless entry remote transmitter once.
To confirm that the doors have been locked press the LOCK button again, within five seconds of the first press. The horn will chirp once if the doors