Expedition 2WD V8-281 4.6L SOHC (1998)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Rear
The rear sensor indicator is built into the rear differential. Refer to rear differential for disassembly and assembly procedures.
Removal and Installation
REMOVAL
1. Remove the front disc brake rotor.
2. Use 2-3 Jaw Puller to remove the front anti-lock brake sensor indicator.
CAUTION: Discard the front anti-lock brake sensor indicator.
INSTALLATION
1. Install the new front anti-lock brake sensor indicator.
1
Position the front anti-lock brake sensor indicator.
2
Use an appropriate size cylinder and press to install the front anti-lock brake sensor indicator.
CAUTION: The front anti-lock brake sensor indicator must be pressed on straight.
2. Install the front disc brake rotor.