Expedition 2WD V8-281 4.6L SOHC (1998)
4. Inspect the pads for wear or contamination.
CAUTION: Replace the lining if worn to or past the specified thickness above the metal backing plate or rivets. Replace the pads in complete
axle sets.
5. Remove the disc brake caliper.
1
Remove the caliper bolts using a T45 Torx.
2
Lift the disc brake caliper off the front disc brake caliper anchor plate.
CAUTION: When removing the front disc brake caliper, never allow it to hang from a brake hose. Provide a suitable support.
6. Measure the front disc brake hub and rotor thickness.
-
Replace the front disc brake hub and rotor if not within specification.
7. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
