ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Fluid Reservoir|Page 6078 > < Initial Inspection and Diagnostic Overview|Page 6075
Page 1
background image

Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir

REMOVAL  

WARNING:  BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH
HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15
MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE
VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
 

1. Disconnect the battery ground cable.

2. Disconnect the brake master cylinder fluid level warning switch electrical connector.
3. Use a suitable suction device to drain the brake master cylinder reservoir. Do not reuse the drained fluid.

4. Carefully pry up on the brake master cylinder reservoir to remove.

INSTALLATION  

Brake Fluid Reservoir|Page 6078 > < Initial Inspection and Diagnostic Overview|Page 6075