Expedition 2WD V8-281 4.6L SOHC (1998)
7. Install the line brackets.
1
Position the bracket.
2
Install the nut.
-
Snap the line into the bracket.
CAUTION: Verify that clearance exists between the frame and the lines to prevent component damage.
NOTE: The bracket must be positioned equally between the white location marks on the line.
8. Connect the heater water outlet line to the engine heater outlet hose coupling.
9. Install the bolts, the pushpins and the front fender splash shield.
10. Lower the vehicle.
11. Turn on the air suspension switch, if equipped.
12. Fill the cooling system.
