Expedition 2WD V8-281 4.6L SOHC (1998)
13. Install the ignition coils and brackets.
1
Position the LH ignition coil and the ignition coil mounting bracket.
2
Install the LH nuts.
3
Install the LH bolt.
4
Position the RH ignition coil and ignition coil mounting bracket.
5
Install the RH bolts.
14. Connect the following electrical connections:
^
RH ignition coil electrical connector (A)
^
radio capacitor electrical connector (B)
15. Connect the following electrical connections:
^
LH ignition coil connector (A)
^
CMP electrical connector (B)
^
radio capacitor electrical connector (C)
16. Install the valve covers.
17. Install the water pump.
18. Install the radiator.
19. Connect the battery ground cable.
20. Fill the engine with oil.
^
Use engine oil meeting Ford specification WSS-M2C153-G.
