Expedition 2WD V8-281 4.6L SOHC (1998)
Piston Ring: Testing and Inspection
End Gap
CAUTION:
^
Use care when fitting piston rings to avoid possible damage to the piston ring or the cylinder bore.
^
Piston rings should not be transferred from one piston to another.
NOTE: Cylinder bore must be within specification for taper and out-of-round to fit piston rings.
1. Use a piston without rings to push a piston ring in a cylinder to the bottom of ring travel.
2. Measure the top piston ring end gap.
3. Measure the 2nd piston ring end gap.
