Expedition 2WD V8-281 4.6L SOHC (1998)
6. Disconnect the accelerator cable from the throttle body cam.
1
Remove the bolt.
2
Slide the accelerator cable from the throttle body cam.
7. If equipped, disconnect the speed control actuator cable from the throttle body.
1
Remove the bolt.
2
Disconnect the (A) speed control actuator cable from the (B) throttle body cam and position aside.
8. Disconnect the Throttle Position Sensor (TPS) electrical connector.
9. Disconnect the following vacuum connections.
^
The EGR vacuum supply.
^
The EGR vacuum regulator.
^
The Vapor Management Valve (VMV).
