Expedition 2WD V8-281 4.6L SOHC (1998)
22. If equipped, install the speed control actuator cable.
1
Install the bolt.
2
Connect the (A) speed control actuator cable to the (B) throttle body cam.
23. Connect the accelerator cable to the throttle body cam.
1
Roll the throttle body cam forward.
2
Slide the accelerator cable into the throttle body cam.
24. Install the throttle return spring.
25. Install the engine air cleaner.
26. Install the accelerator control splash shield.
27. Position the radiator air deflector and install the screws.
28. Connect the battery ground cable.
29. Fill the engine with Ford Premium SAE 1OW-30 Motor Oil XO-1OW-30-BSP, DSP, QSP or equivalent meeting Ford specification
