Expedition 2WD V8-281 4.6L SOHC (1998)
Fig. 26 Crankshaft Sprocket Position
12. NOTE: Crankshaft sprockets are identical. They may only be installed one way. Refer to the illustration for correct crankshaft sprocket
installation.
If removed, install LH an RH crankshaft sprockets.
13. Install the LH timing chain onto the crankshaft sprocket, aligning the one copper (marked) link on the timing chain with the slot on the crankshaft
sprocket.
14. NOTE: Make sure the upper half of the timing chain is below the tensioner guide dowel.
NOTE: If necessary, adjust the camshaft sprocket slightly to obtain timing mark alignment
Position the LH timing chain on the camshaft sprocket with the two copper (marked) chain links and the camshaft sprocket timing mark aligned.
