Expedition 2WD V8-281 4.6L SOHC (1998)
3. Remove the LH instrument panel lower nut and position the brace aside.
4. Remove the floor duct.
1
Remove the two screws (one each side).
2
Remove the floor duct.
5. Remove the panel/floor door vacuum control motor.
1
Disconnect the vacuum line connector.
2
Remove the vacuum control motor screws.
3
Slide the rod out of the door and remove the panel/floor door vacuum control motor.
NOTE: Rotate the vacuum control motor to disconnect the vacuum control motor rod from the panel/floor door.
INSTALLATION