Expedition 2WD V8-281 4.6L SOHC (1998)
6. Connect the heater outlet line to the heater outlet line.
1
Connect the fittings.
2
Loosely install the nut.
7. Install the heater outlet line.
-
Install the end with the hose through the floor opening.
8. Tighten the four peanut fittings.
9. Install the line brackets.
1
Position the bracket.
2
Install the nut.
-
Snap the line into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the line.