Expedition 2WD V8-281 4.6L SOHC (1998)
10. Install the line brackets.
1
Position the bracket.
2
Install the nut.
-
Snap the line into the bracket.
NOTE: The bracket must be positioned equally between the white location marks on the line.
11. Lower the vehicle.
12. Turn on the air suspension switch, if equipped.
13. Connect the inlet line to the auxiliary evaporator case line.
14. Install the grommet seal and retainer.
NOTE: Verify that the lines are entering through the center of the floor opening and that the retainer locating marks are positioned correctly.
15. Install the quarter trim access panel.
16. Evacuate and charge the A/C system.
17. Install the spare tire.
