Expedition 2WD V8-281 4.6L SOHC (1998)
16. Install the following components:
(1) Install the retainer nut.
(2) Install a new cotter pin.
(3) Install the hub grease cap.
17. Install the front disc brake caliper anchor plate.
18. Install the tire and wheel assembly.
(1) Position the tire and wheel assembly.
(2) Install the lug nuts and lower the vehicle.
(3) Tighten the lug nuts in sequence.
(4) Install the wheel cover.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.