Expedition 2WD V8-281 4.6L SOHC (1998)
9. Remove the accelerator control splash shield.
1
Remove the bolts.
2
Remove the accelerator control splash shield.
10. Disconnect the following electrical connectors:
-
Idle Air Control (IAC) valve electrical connector (A).
-
Differential Pressure Feedback (DPFE) Exhaust Gas Recirculation (EGR) transducer electrical connector (B).
-
Engine Vacuum Regulator (EVR) electrical connector (C).
-
Throttle Position (TP) sensor electrical connector (D).
11. Disconnect the engine cooling system sensor connectors.
-
Disconnect the (A) Engine Coolant Temperature (ECT) sensor electrical connector.
-
Disconnect the (B) water temperature indicator sender unit electrical connector.
12. Disconnect the four RH fuel injector electrical connectors.