Expedition 2WD V8-281 4.6L SOHC (1998)
15. Disconnect the Vapor Management Valve (VMV) hose.
16. Remove the fuel injection supply manifold bolts and lift fuel injection supply manifold and injectors upward out of intake manifold.
17. Remove the (A) fuel injectors from the (B) fuel injection supply manifold.
18. Replace the O-rings from each fuel injector, if necessary.
INSTALLATION
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED,
RESULTING IN POSSIBLE PERSONAL INJURY.
CAUTION: Use replacement O-rings if necessary.
1. Install two O-rings onto each fuel injector.