Expedition 2WD V8-281 4.6L SOHC (1998)
Ignition Coil: Service and Repair
REMOVAL
NOTE: Procedure is for either RH or LH ignition coil; RH ignition coil is shown.
1. Disconnect the ignition coil electrical connections.
1
Disconnect the ignition coil electrical connector.
2
Disconnect the radio capacitor electrical connector.
2. Squeeze the (A) locking tabs and disconnect the (B) spark plug wires.
CAUTION: Spark plug wires must be connected to the proper ignition coil terminal. Mark spark plug wire locations.
3. Remove the ignition coil.
1
Remove the bolts.
2
Remove the ignition Coil.
4. Inspect the ignition coil for carbon tracks or damage, replace as necessary.
INSTALLATION
NOTE: Procedure is for either LH or RH ignition coil RH is shown.