Expedition 2WD V8-281 4.6L SOHC (1998)
1. Remove the safety belt guide bolt cover.
^
Carefully pry out at the bottom.
2. Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3. Remove the quarter trim panel.
NOTE: On vehicles equipped with auxiliary A/C, only the auxiliary A/C access panel needs to be removed and not the quarter trim panel.
4. Remove the detachable anchor.
^
Depress the release button.
5. Remove the rear safety belt retractor.
1. Use Safety Belt Bolt Bit to remove the bolt.
2. Remove the retractor.