Expedition 2WD V8-281 4.6L SOHC (1998)
Seat Belt Retractor: Service and Repair
Third Row Seat Safety Belt
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
NOTE: This procedure is for the LH side; the RH side is similar.
1. Remove the safety belt guide bolt cover.
^
Carefully pry out at the bottom.
2. Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3. Remove the quarter trim panel.
NOTE: On vehicles equipped with auxiliary A/C, only the auxiliary A/C access panel needs to be removed and not the quarter trim panel.