Expedition 2WD V8-281 4.6L SOHC (1998)
19. Remove the input shaft snap ring.
20. Rotate the valve housing with Bench Mounted Holding Fixture and use Input Shaft Bearing/Seal Tool to remove the bearing and power steering
gear input shaft seal.
21. Remove the valve housing from Bench Mounted Holding Fixture.
22. Install the steering gear housing in Bench Mounted Holding Fixture and remove the steering gear sector shaft dust seal from the sector shaft seal
bore.
23. Remove the spacer.
(1) Remove the snap ring.
(2) Remove the spacer.
