Expedition 2WD V8-281 4.6L SOHC (1998)
1. Install the front coil spring into the front suspension lower arm.
(1) Position the front coil spring on the front suspension lower arm.
(2) The spring must cover the first hole.
(3) The spring must be visible in the second hole.
2. Install the lower ball joint castellated nut.
(1) Install the castellated nut.
(2) Install a new cotter pin.
3. Install the front stabilizer bar link nut.
4. Remove the Coil Spring Compressor.
5. Install the front shock absorber and the two shock absorber lower nuts.
