Expedition 2WD V8-281 4.6L SOHC (1998)
Accumulator: Service and Repair
1-2 Accumulator
Special Tools
REMOVAL
1. Use (A) Servo Piston Remover Replacer to compress the 1-2 accumulator cover and remove the (B) accumulator piston retaining ring.
2. NOTE: Note the location of the 1-2 accumulator springs for reference during assembly.
1
Remove the l-2 accumulator cover.
2
Remove the lower 1-2 accumulator spring.
3
Remove the accumulator piston.
4
Remove the upper 1-2 accumulator spring.
INSTALLATION
1. Install the 1-2 accumulator.