Expedition 2WD V8-281 4.6L SOHC (1998)
8. NOTE: To aid handling, the forward clutch assembly may be set in the extension housing or a hole in the work bench.
Remove the clutch pack selective retaining ring.
9. Remove the (A) pressure plate, (B) clutch pack and (C) pressure spring.
10. CAUTION: Apply only enough pressure to release pressure on the retaining ring. If too much pressure is applied, the spring may break.
Use (A) Direct Clutch Spring Compressor and an arbor press to remove the (B) forward clutch retaining ring.
11. Slowly release the press and remove the forward clutch from the press.
12. Remove the (A) forward clutch retainer and the (B) return spring.
