Expedition 2WD V8-281 4.6L SOHC (1998)
15. Position and zero Dial Indicator With Bracketry on the forward clutch pack.
-
Push downward on the clutch pack.
-
Release pressure and zero the dial indicator.
16. Check the clutch pack clearance.
1
Lift up on the clutch pack until it fully seats against the clutch pressure plate retainer.
2
Read the dial indicator.
-
If the clearance is not within specifications, install the correct size retaining ring.
Selective Retaining Ring
17. NOTE: Make sure scarf-cut seals are mated correctly.
Slide the two scarf-cut seals on the input shaft. (A) is correct; (B) is incorrect mating.