Expedition 2WD V8-281 4.6L SOHC (1998)
5. CAUTION: The piston bleed hole must be located at 12 o'clock position (towards the top of the transmission). Shift problems may occur if
installed incorrectly.
NOTE: The piston bleed hole is the only round hole in the pump body.
Locate the piston bleed hole.
6. Install by snapping the spring retainer assembly on pump body.
7. NOTE: The flats on the inner fluid pump gear have steps that must face the pump body for ease of installing the torque converter.
Install the (A) inner and (B) outer fluid pump gerotor gears.
8. NOTE: The reverse clutch cylinder seals are larger than the forward clutch cylinder seals.
Install the (A) reverse clutch cylinder seal and the (B) forward clutch cylinder seals.
