Expedition 2WD V8-281 4.6L SOHC (1998)
7. NOTE: The piston check ball must be present and moving freely.
Install a new (A) reverse clutch piston inner seal and (B) reverse clutch piston outer seal.
8. NOTE: Coat the reverse clutch piston inner seal, reverse clutch piston outer seal reverse clutch drum sealing area and seal protector with
petroleum jelly.
Install the reverse clutch piston.
1
Position Reverse Clutch Inner Seal Protector on the clutch hub.
2
Place Reverse Clutch Outer Seal Protector over reverse clutch piston.
3
Position the reverse clutch piston and use even pressure to push it to the bottom of the reverse clutch drum.
9. NOTE: The dished side of the reverse clutch piston spring must face the reverse clutch piston.
Install the (A) pressure ring and the (B) reverse clutch piston spring.
