Expedition 2WD V8-281 4.6L SOHC (1998)
1. Install the extension housing and gasket.
1
Position the extension housing gasket and the extension housing.
2
Install the bolts and nuts.
2. Install the new extension housing seal.
1
Align Extension Housing Seal Replacer with the seal.
2
Install the extension housing seal.
3. Raise and position the transmission.
4. Install the transmission crossmember.
1
Position the transmission crossmember.
2
Install the bolts.
5. Install the transmission crossmember bolts.
6. Remove High-Lift Jack.