Expedition 2WD V8-281 4.6L SOHC (1998)
Torque Converter: Testing and Inspection
Leakage Checks
1. Clean the outside surface of the torque converter.
2. Install Torque Converter Leak Check Tool and Gasket into convert hub.
3. WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING PRESS.
Install the torque converter with the installed leak check tool into the Arbor press.
Secure the press. Apply enough force from the press to seal tool into the torque converter.
4. NOTE: Use clean dry shop air.
Apply air pressure to valve on leak check tool.
