Expedition 2WD V8-281 4.6L SOHC (1998)
2. NOTE: Do not mix the differential clutch packs or shims from one side with the other.
Assemble the differential clutch packs (without the shims) on the respective differential side gears.
3. CAUTION: Make sure the proper mandrel is used with a Traction-Lok(R) Clutch Gauge.
Place the base portion of Traction-Lok(R) Clutch Gauge in a vise. Install the differential clutch pack and differential side gear (without the shim)
on the gauge.
-
Refer to the tool chart for the correct mandrel.
4. Position the Traction-Lok(R) Clutch Gauge on top of the differential clutch pack.
