Expedition 2WD V8-281 4.6L SOHC (1998)
1. Remove the differential case.
2. NOTE: The differential bearings need not be removed to overhaul the Ford limited slip differential. If bearing removal is required, use the 2-Jaw
Puller for Differential Case Bearings and the Step Plate Adapter.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Remove the differential pinion shaft lock bolt and remove the differential pinion shaft.
-
If required, remove the ring gear and anti-lock speed sensor ring.
3. Install the Traction-Lok(R) Torque Tool in a suitable vise.
4. Install the differential case on the tool.
5. Install the Step Plate Adapter in the bottom side gear bore. Apply a small amount of grease to the centering hole of the Step Plate Adapter.