Expedition 2WD V8-281 4.6L SOHC (1998)
3. NOTE: Use the Traction-Lok(R) Clutch Gauge Mandrel for the procedure. Refer to the Special Tool(s) Chart.
Clamp the bolt head of the Traction-Lok(R) Clutch Gauge in a vise. Install the differential clutch pack and the differential side gear (without the
shim or the Belleville spring) on the gauge.
4. Position the Traction-Lok(R) Clutch Gauge on top of the differential clutch pack.
5. Install the Traction-Lok Clutch Gauge over the disc and differential clutch pack.
6. Install the nut of the gauge over the top and base stud.