Expedition 2WD V8-281 4.6L SOHC (1998)
13. Loosen the forcing screw, and remove the step plate and nut from the side gear bores. Install the differential pinion shaft in the differential case.
-
Install a new differential pinion shaft lock bolt finger-tight.
14. Replace the differential bearings, if removed, using the Differential Bearing Cone Replacer.
15. Using a press, install the ring gear and, if removed, a new anti-lock speed sensor ring on the differential case and tighten the retaining bolts.
-
The notch on the differential case flange and the notch on the anti-lock speed sensor ring must be aligned.
16. Install the differential case.
