Expedition 2WD V8-281 4.6L SOHC (1998)
Pinion Flange: Service and Repair
9.75 Inch Ring Gear
Special Tools
SPECIAL TOOL(S)
REMOVAL
1. NOTE: The rear wheels and brake rotors must be removed to prevent brake drag during drive pinion bearing preload adjustment.
Remove the rear brake rotors.
2. Mark the driveshaft flange and rear axle companion flange for correct alignment during installation.
3. Remove the four driveshaft bolts, and disconnect the driveshaft. Wire the driveshaft out of the way.
