Expedition 2WD V8-281 4.6L SOHC (1998)
15. NOTE: Disregard the scribe marks if a new rear axle companion flange is being installed.
Align the rear axle companion flange with the drive pinion shaft.
16. With the drive pinion in place in the rear axle housing, install the rear axle companion flange using the Companion Flange Replacer.
17. Position the new pinion nut.
18. CAUTION: Under no circumstances is the pinion nut to be backed off to reduce preload. If reduced preload is required, a new collapsible spacer
and pinion nut must be installed.
Use a suitable companion flange holding tool to hold the rear axle companion flange while tightening the pinion nut.
-
Refer to the torque specification for new pinion bearings.
19. Install the differential case in the rear axle differential carrier.
