Expedition 2WD V8-281 4.6L VIN W EFI (1997)
ACTION:
Remove the rear door quarter window and remove 2 mm of the backside of the white locating clips next to the foam seal using metal shears or side
cutters (Figure 1). This will reduce the possibility of windnoise by allowing the weatherstrip to seat properly. Refer to the 1997 Expedition Workshop
Manual, Section 501-11, for quarter window removal and installation procedures.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
970812AT
Trim Locating Clips - Both Doors
0.6 Hr.
970812A
Trim Locating Clip - One Door
0.6 Hr.
DEALER CODING
CONDITION
BASIC PART NO.
CODE