Expedition 2WD V8-281 4.6L VIN W EFI (1997)
5. Install the brake master cylinder fluid control valve.
6. On speed control equipped vehicles, install the brake pressure switch.
Install Brake Master Cylinder Filler Cap
7. Fill the (A) brake master cylinder reservoir and install the (B) brake master cylinder filler cap.
8. Bleed the brake master cylinder. See: Bleeding/Bench
9. Install brake master cylinder.
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. avoid contact with eyes. Wash hands thoroughly after handling. if brake
fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water
and induce vomiting. Get medical attention immediately.
REMOVAL
1. Disconnect the battery ground cable.
