Expedition 2WD V8-281 4.6L VIN W EFI (1997)
INSTALLATION
To install, reverse the removal procedure, noting the following:
^
Tighten the mounting nuts to 22-28 Nm (17-20 ft. lbs.).
^
Tighten the line nuts to 15-20 Nm (11-14 ft. lbs.).
^
Bleed the brake master cylinder. See: Bleeding/Bench
^
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 mi.) or more to relearn the strategy.