Expedition 2WD V8-281 4.6L VIN W EFI (1997)
![background image](/ford/expedition_2wd/v8-281_4.6l_vin_w_efi/Page-614001.png)
Connecting Rod: Testing and Inspection
Connecting Rod Bearing Journal Clearance
NOTE: The crankshaft connecting rod journals must be within specification to check the connecting rod bearing journal clearance.
1. Remove the connecting rod bearing cap.
2. Position a piece of Plastigage across the bearing surface.
3. Install and torque to specifications, then remove the connecting rod bearing cap.
NOTE: Do not turn the crankshaft during this step.
4. Measure the Plastigage to get the connecting rod bearing journal clearance. The Plastigage should be smooth and flat. A changing width indicates
a tapered or damaged connecting rod bearing or connecting rod.
Connecting Rod Bend
Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is
within specification.
Connecting Rod Bushing Diameter