Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Third Row
REMOVAL and INSTALLATION
1. Remove the LH lower pivot cover.
2. Remove the seat adjuster handle.
3. Remove the RH lower adjuster cover.
4. Remove the seat back from the seat cushion.
5. Remove the seat cushion cover and pad from the seat cushion frame.
6. Remove the seat cover from the seat cushion.
7. Remove the safety belts.
8. To install, reverse removal procedure.
40/60 Split Bench Seat, Center and RH Passenger
REMOVAL
Remove the front passenger safety belt.
1
Use T55 "Torx" Bit to remove the bolt.
2
Feed the belt through the seat cushion pocket and remove the belt.
INSTALLATION
To install, reverse the removal procedure.
-
Check the restraint system for proper operation.
40/60 Split Bench, Driver Seat
REMOVAL