Expedition 2WD V8-281 4.6L VIN W EFI (1997)
Voltage Regulator: Service and Repair
REMOVAL
1. Remove the generator.
2. Remove the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
1. Remove the voltage regulator screws.
2. Remove the (A) generator brush and terminal holder and (B) voltage regulator assembly.
INSTALLATION
1. Install the (A) generator brush and terminal holder and (B) voltage regulator assembly.
1. Depress the (C) brushes and insert a (D) wire to hold brushes during installation.
2. Install the (A) generator brush and terminal holder and (B) voltage regulator assembly.
3. Install the voltage regulator screws.
-
Remove the (D) wire.
2. Install the generator.