Expedition 2WD V8-281 4.6L VIN W EFI (1997)
NOTE: The end of the (A) coil spring must cover the (B) first hole and be visible in the (C) second hole.
2. Install the front suspension lower arm.
(1) Position the front suspension lower arm and front coil spring.
(2) Install the two bolts and nuts.
NOTE: The forward front suspension lower arm nut must be tightened first while the control arms are held at the curb position ride height.
3. Install the lower ball joint castellated nut.
(1) Install the castellated nut.
(2) Install a new cotter pin.
4. Install the front stabilizer bar link nut.
5. Remove Coil Spring Compressor.