Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
15. If equipped, remove the second row seat dome lamp assembly.
1
Remove the lens cover.
2
Remove the screws.
3
Remove the second row seat dome lamp assembly.
16. Remove the rear header garnish trim panel.
17. If equipped, remove the two third row safety belt guides.
1
Lift the two covers.
2
Use Safety Belt Bolt Bit to remove the safety belt guide bolts.
3
Remove the two third row safety belt guides.
18. Remove the two D-pillar trim panels.
^
Remove the liftgate door opening weather seal.
NOTE: Remove the lower hook attached to the quarter trim panel, followed by the top attachment, and then the lower rear attachment.