Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
Sunroof / Moonroof Motor: Service and Repair
REMOVAL
1. Remove the access cover.
NOTE: The roof opening panel should be in the closed position.
2. Remove the three bolts.
3. Disconnect the electrical connector and remove the roof opening panel motor.
INSTALLATION
NOTE: The roof opening panel module must be installed prior to motor installation.
1. Connect the electrical connector.
NOTE: The roof opening panel should be in the closed position.
2. Cycle the roof opening panel motor until it stops in the closed position.
3. Remove the roof opening panel.