Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
8. Connect the heater outlet line to the heater outlet line.
1
Connect the fittings.
2
Loosely install the nuts.
9. Tighten the four peanut fittings.
10. Install the line brackets.
1
Position the bracket.
2
Install the nut.
3
Snap the line securely into the bracket.
CAUTION: Overtightening of the nut will cause the stud to break away from the floorpan.
NOTE: The bracket must be positioned equally between the white location marks on the line.
