Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
3. Tighten the front cover bolts and stud bolts in sequence in two stages.
Stage 1: Tighten fasteners 1 - 7 to 20 - 30 Nm (15 - 22 ft. lbs.).
Stage 2: Tighten fasteners 6 - 15 to 40 - 55 Nm (29 - 40 ft. lbs.).
4. Position the (A) belt idler pulley and install the (B) bolt.
5. Install a new crankshaft front oil seal.
6. Raise and support the vehicle.
7. Loosely install the front bolts.
8. NOTE: Make sure to tighten the bolts in two stages.