Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
14. Disconnect the air bag sliding contact electrical connectors.
1
Separate the electrical connectors from the retaining bracket and disconnect from the harness.
2
Separate the air bag sliding contact wire harness from the clips retaining it to the steering column.
15. Remove the air bag sliding contact.
1
Pry the retaining clips loose.
2
Remove the air bag sliding contact.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the
diagnostic procedure again.
2. Prove out the air bag system.
