Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
Install the front suspension upper arm.
1
Position the front suspension upper arm.
2
Install the bolts and nuts.
2. Install the upper ball joint castle nut.
1
Install the nut.
2
Install a new cotter pin.
3. WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign material present on the mounting surfaces of the
wheel or the surface of the wheel hub, or brake disc that contacts the wheel. Installing wheels without proper metal-to-metal contact at
the wheel mounting surfaces can cause the lug nuts to loosen and the wheel to come off while the vehicle is in motion, causing loss of
control.
Clean the wheel hub mounting surface.
4. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the tire and wheel assembly.
1
Position the tire and wheel assembly.
2
Install the lug nuts and lower the vehicle.
3
Tighten the lug nuts in sequence.
4
Install the wheel cover.
5. Inspect and adjust the front end alignment.
