Expedition 2WD V8-4.6L SOHC VIN 6 (1999)
10. Use the Pitman Arm Puller to separate the tie rod end from the front wheel spindle.
11. Use the Coil Spring Compressor to compress the front coil spring.
12. Remove the lower ball joint castle nut.
1
Remove and discard the cotter pin.
2
Remove the castle nut.
13. Separate the lower ball joint.
1
Install the Pitman Arm Puller.
2
Separate the lower ball joint.
14. Remove the front wheel spindle.
Installation
